SBS 2008 Server Annoying Error

Event Details:  
The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID {61738644-F196-11D0-9953-00C04FD919C1} to the user NT AUTHORITY\NETWORK SERVICE SID (S-1-5-20) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.

to NT AUTHORITY\NETWORK SERVICE account as follows:

• In Administrative tools, open Component Services and expand Component Services, Computers, My Computer, DCOM Config
• Look for the IIS WAMREG Admin Service
• Right click and select Properties and then select the Security tab
• Click Edit under Launch and Activation Permissions
• Add the Network Service user
• Add Local Activation rights
• Click OK twice
• Close Component Services

http://www.seasideit.com/2009/01/dcom-error-10016-on-sbs-2008.html

Brother Printer Toner Reset 9320CW

How to reset Brother 9320CW toner
1. With power on, open the toner access main door (You will get a “door open” message in the LCD.)
2. Hit the “Clear/Back” button and… ta-dah!!! you go right to the “Toner Reset Menu”
3. Using the up ^ Down > “Search” arrow buttons, you can then scroll through reset options for each of the printer’s [4] toner cartridges!
Code: K. = black; C. = cyan; M. = magenta and Y. = yellow
4. For each for these cartridges, there is the option to reset for STD (standard?) or STR (high yield?). I selected STD for all toners.
5. Using the number keypad, select option #1 for RESET.
6. Hit the “Clear/Back” button to get out of the menu, close door and all toners are working like new ones.
then your original toners are continuing to work.

Viper Key FOB replacement Pairing\Programming

So I recently went through the fun of programming a new 7251V Viper 2-Way LE Responder
Remote Replacement for my Prius. I figured I would save anyone else out there the trouble that I had with the programming. I noticed all of the information on the internet was not enough to actually get it working on a Prius. So here is how I got it working on my 2009 Toyota Prius.

1st you need to enter the remote into progamming Hold the Function button until the remote gives a long beep and LED light comes on the remote a (it takes about 8 sec.) Then press and hold the remote start buttom until the remote beeps 3 times and LED lights up. Now your ready to program the remote, you have 60 seconds to do the steps in the next 2 paragraphs.

One of the door has to be open . Turn on Prius so it says "Ready" and the ignition is fully on (this is the important part that none of the other forums talks about, the car must be running). As soon as you turn the car on you have 5 seconds to do the next step which is to press and release the control center button (Control center is just the antenna that is mounted on you windshield, it should have a blue light and a button that you can press). After you have done that you have another 5 seconds to press and hold the button after roughly 5 seconds of holding the button down the blue light will start blinking and if you have the system hooked up to more than just remote start and doors you may hear a chirp or horn honk, but in my case neither apply so I had to watch for the blinking light because that was my only indication.

Then you need to press the lock button on the remote and you will hear a success tone from the remote and maybe a chirp from the Viper system. After you are done with that you can turn the car off and hit the function button twice to exit and save the programming\paring information.

Does that help? I know this info would have helped me big time when I was going through it so I hope I can help others.

Thanks,
-Spader

How to disable Sirius XM Timeout

If you're like me and listen to the Sirius XM online radio 24/7, then the 90 minute streaming timeout really gets annoying.  We'll I've got the solution for you.  I have done this in Chrome and Firefox and it works great.

In summary to disable the streaming timeout you need to disable the JavaScript (JS) on the page after you have started the streaming session.  It won't work if you disable JS before logging in because it requires JS to log in.

I recommend using Chrome because the Extension from this location does a great job of disabling the java only on the Sirius XM tab and other tabs can continue to use JS.

The other option if you don't like Chrome is to use the QuickJava add-on in Firefox.  Some downfalls I have seen with this is that it diables JavaScript in all tabs, and it goes on to disable JS in your other Firefox installations if you have the QuickJava Add-On installed there and enable Sync in your Firefox browser.  To use this plugin you have to make sure you go to View --> Toolbars --> Add-on Bar then you can click on the JS at the bottom of the Firefox page.

Acer Iconia Tablet A500 Wireless Hack for PEAP

For everyone out there that want's to use their Acer Iconia A500 tablet at work but can't get get around the darn Enterprise level encryption. I hope I have your fix.

Background on my issue is that I bought a A500 tablet along with 2 other co-workers. Then WIFI stopped working for some reason almost exactly 2 weeks after connecting to the Corporation's WIFI network. They use PEAP encryption and require me to enter my username and password. I tried everything for months to get it working again but no luck. The interesting fact is that one of my co-workers had the exact same issue as me but the other co-worker didn't have any problems at all.

I have called Acer about this issue and they were absolutely no help and actually said the Honeycomb OS doesn't support it... FAIL. This issue had nothing to do with the OS.

So after trying everything, yesterday I was tinkering around with it and this is what I did to fix it.

Rebooted-->entered my username in the username\identity field then put characters in the field under that "Anonymous identity", and that's it, then I hit SAVE. Then turned wireless off then on. Then I put my credentials in the correct way with my username in the "identity" field and my password in the "password" field then turned wireless off and back on and then viola. I'm back in business.

I know I know, sounds more like witchcraft then troubleshooting, but it worked for me and and my other co-worker that was having troubles with it.

Let me know if you have any questions.
-Ben

HTC EVO GPS fix on Cyanogenmod 7

After recently upgrading my HTC EVO on Sprint to the latest nightly builds I had major issues trying to get the GPS to work properly. I tried installing build number #54, #55, #57, #62, #64, I also tried installing stable release 7.0.3.1 and 7.0.2. But after installing all of these builds had a broken GPS within build.

I had read many possible solutions on the net but the only fix that actually worked was this one:

Warning: This is for advanced users. If you are not comfortable flashing and changing crap on your phone, don't do it. No one is responsible for messing up your phone other than you.

When on a Sense ROM (it can be stock, Fresh, Sprint Lovers, etc) do the following:

• MAKE SURE YOU DO A FULL BACKUP FIRST!
• Download MSL reader from the market
• Run MSL reader to get your MSL. Your phone may freeze up after you get your MSL. Your MSL should be 6 digits long.
• Flash to any Sense ROM. Unless you have a prior backup of Stock Sense or any other Sense ROM, I suggest flashing Fresh. Note: I had issues with Rom Manager version 3.0.0.5 while trying to flash a Sense ROM. If you have this issue also then you should flash an earlier recovery, I used 2.5.0.7 and it finally worked.
• In the dialer, dial: ##GPSCLRX# (##4772579#)
• Your phone will ask for a security number. This is the MSL. Input it here.
• Reboot
• After it has rebooted, test your GPS in Sense to make sure it works. If you need to, follow these steps again.
• While you are in Sense, go to settings > about phone > updates > update PRL.
• After the PRL is updated, go back to the updates and hit update profile.
• Once the profile is updated either reboot into recovery or use Clockwork Mod, then
• Flash your backup of CyanogenMod 7

Toyota Prius Hacks

One of the most annoying things about my Toyota Prius is the it beeps constantly while in the reverse gear. As in, it beeps the entire time you’re in reverse. If you’re like me, you just drove your new Prius home and you’re Googling for a fix. Look no further, my friend.
The second Prius hack (below) to disable the seatbelt beeping is meant to serve as a convenience feature only. I often put something heavy (non-human) on the passenger seat and the Prius will beep annoyingly to remind (my computer bag mostly) that it needs to wear its seatbelt. Obviously, you should always wear you seatbelt for safety reasons. As the sticker I recently saw on a UHaul said “Don’t get caught dead sitting on your seatbelt.”
To disable the reverse beeping on your Prius (tested on the 2009 model):

1. Without your foot on the brake, turn on your Prius and make sure you are in ODO mode (not Trip A or B). Power off the Prius
2. With your foot on the brake, turn on the Prius. As soon as the ‘Ready’ light is lit, press and hold the ODO button for at least 10 seconds.
3. Keeping the ODO button pressed, move the shifter to Reverse and release, then press the Park button again. At this point, ‘b- on’ should appear on your dashboard display.
4. You can now let go of the ODO button, and each press of the ODO button toggles between ‘b-on’ and ‘b-off’. To disable the reverse beep, simply set it to ‘b-off’, the power off the Prius.

And to disable each of the front seatbelt warning beeps, follow these instructions:

1. Be sure someone is sitting in the seat which seatbelt beep you wish to disable.
2. Without your foot on the brake, turn on your Prius and make sure you are in ODO mode (not Trip A or B). Power off the Prius
3. With your foot on the brake, turn on the Prius. As soon as the ‘Ready’ light is lit, press and hold the ODO button for at least 10 seconds.
4. Keeping the ODO button pressed, insert the seatbelt that you wish to disable the beep for. At this point, ‘b- on’ should appear on your dashboard display.
5. You can now let go of the ODO button, and each press of the ODO button toggles between ‘b- on’ and ‘b-off’. To disable the reverse beep, simply set it to ‘b-off’, the power off the Prius.

These instructions may work for earlier model years as well, although 2006 and earlier models may require no one be in the seat which seatbelt is being disabled.

UPDATE: I recently changed my starter battery in my Prius and I had to run through these steps again.  Seriously Toyota... You have a myriad of batteries in this car and you couldn't find one to hold these settings.  My kids toys have more capabilities that that! Yet another car manufacture #FAIL

Where's that sound coming from???

Learned today that it's not good to set the wireless Access Point on top of the computer amplifier.

I searched everywhere looking for power cables over the speaker wires then I finally figured out it was the AP sitting on top of the bass\amplifier under my desk.

Immediate satisfaction :)

Toyota's Seat Belt Chime\Alarm

First of all I would like to strangle Toyota for implementing the most annoying seat belt alarm. I can guarantee that does nothing to help with the safety of the car\truck. If poeple don't want to ware a seat belt an alarm isn't going to get them to start.

You know what Toyota, it's the their life if they choose not to buckle up. Me personally I always

buckle up; but yet they have succeeded in installing an alarm that is incredibly annoying even for people who use the seat belt.

So for any owner of a 2008 Toyota Tundra, here is how you disable the seatbelt alarm in less then 5 minutes. Shorter then the time I spent on this post :).

Steps:

• Detach the seat belt sensor from the back of the seat belt buckle by using a pointy object to push in this little black button and then pulling down on sensor from the seat belt buckle:

• Next all you have to do is remove th small spring that holds the white plastic piece up. This plastic piece would be pushed down if the seat belt was inserted into the buckle. Take a small piece of tape to hold it down, because I hear that it could disable your airbag if you don't. (kind of important).

Then it is simple to insert the sensor back into the seatbelt and viola! No annoying pointless beep!!!

I'm guessing this will work for any Tundra after 2007 seeing that was the last year they made major changes to the Tundra.

UPDATE: I have found that on my 2008 Tundra I can not do this on the Passenger seat because it will disable the passenger air bag.  But it does still work on the drivers seat.  Please beware when doing the passenger seat, I tried many times and it looked like I got it working without disabling the airbag but then about a day later the air bag was disabled and would not go back on until I put the spring back in.

-Ben